Top 10 Best Woodworking Blades For Plywood Reviews

How To Choose The Best Blade For Plywood

Every homeowner knows that cutting plywood into smaller pieces using hand saws is essential to finishing a project. But there's no such thing as one right tool for every job. And each blade has its advantages and disadvantages.
Here's what you need to know about choosing the best blade for cutting plywood:

Blade Type

Choosing the correct blade type is the most important factor when selecting a saw. There are several types of blades available for buying. Some are specifically designed for woodworking, others for metalwork, and others for carpentry.

There are two main categories for plywood blades: general and particular. General purpose blades are usually made from carbide steel that works well for cutting wood and metal. Special purpose blades are usually made of stainless steel and cut plastic, metal and even concrete.

For plywood, I recommend using a general-purpose blade. Since plywood is soft and thin, it's easier to damage a blade than to chip away at a piece of drywall. If you prefer to use a special purpose blade, go ahead, but do so with caution.

Blade Size

Depending on the size of your project, you may want to buy a bigger or smaller blade. Most people opt for a 7-1/2 inch blade, but the size varies depending on the material you plan to cut.

A standard 18-tooth blade is suitable for cutting 1x12 boards; however, since plywood is much thinner than solid stock, you'll need something between 20 and 24 teeth.

The number of teeth is determined by multiplying the width of the blade by the length. So, if you have a 60-inch rip fence, the length would be 60 x 2 120 inches. It means that the blade should contain 60 teeth along its entire length.

This isn't always true, though. While most blades are sold this way, some manufacturers sell shorter blades with fewer teeth. For example, a 12-tooth blade cuts a 1x6 board with twice the width of a regular blade. In most cases, you don't need a blade with more teeth. However, a larger blade could be advantageous if you're doing heavy-duty ripping or crosscutting.

Length

Consider whether it will fit over your fence when choosing a longer blade. In addition to being thicker, a longer blade can accommodate more comprehensive fences.

Softer materials like vinyl siding, composite decking and particleboard require longer blades to prevent them from bending. But a longer blade won't extend past your fence if you're cutting metal, concrete or hardwood flooring.

To determine which blade length to choose, take the above measurements and multiply them together. Then divide the result by 240 (the number of seconds in a minute) to determine the length in minutes. For example, if you have a 24-inch rip fence, a 25-tooth blade would measure 8 feet long.

It takes approximately 10 minutes for the blade to complete a full circle around the board, so the total time required to finish a cut would be 40 minutes. Therefore, a 24-inch rip fence needs a 25-tooth blade. Be sure to check the manufacturer's recommendations before purchasing any blade.

Blade Angle

To maintain accuracy, the angle of the blade must match the angle of the fence. You'll find that the blade cuts unevenly by angling the blade parallel to either side of the fence. You often see people using a 90-degree angle for a rip fence, which creates an angled cut. But, conversely, you sometimes see people using a 45-degree angle for their rip fence, which results.

FAQS:

How Much Does a Blade Cost?

Answer:A saw blade costs anywhere from -50, depending on the quality. However, the higher-quality blades will last longer and cut through tougher materials more easily. Generally, a high-quality blade will cost more but will also be worth it in the long run.

Does anyone have any tips for using woodworking blades?

Answer:Tips for using woodworking blades:

Always wear safety glasses when working with woodworking blades.

Keep a close eye on the blade cutting to avoid injury.

Make sure the blade is sharp before using it and keep it sharpened as needed.

Work slowly and carefully using a woodworking blade to avoid accidents.

Be aware of your surroundings while working with woodworking blades, and stay safe!

How often should I sharpen my woodworking blades?

Answer: If you use your woodworking blades regularly, it is important to keep them sharp. Dull blades can cause significant damage to your workpiece and can also be dangerous if you slip while using them. There is no recommended frequency for sharpening woodworking blades, but it is generally recommended that they be sharpened at least once every two weeks.

If you find that your blades are becoming dull more often than this, it may be worth considering investing in a better quality set of blades.

Should I get a cross cut or rip saw for plywood?

Answer: When it comes to sawing plywood, you can make two main types of cuts - crosscut and rip. Crosscutting is the preferred route for most people because it's less damaging to the wood and leaves a cleaner cut. However, a rip saw will be faster if you have a lot of plywood to cut.

Conclusion & Summary

In conclusion, the best woodworking blades for plywood depend on the user's specific needs and preferences. For example, a thicker blade may be better for chopping through thick sheets of plywood, while a thinner blade may be better for making precise cuts. Whatever the case, it is important to experiment with different blades and find what works best for you.